TT L4-1.8L Turbo (BEA) (2004)
Convertible Top Canvas: Service and Repair
Convertible Top Fabric, Installing
Convertible Top Fabric, Installing
NOTES:
-
For replacement fabric, double sided adhesive strips are applied to the fabric with a protective foil.
-
Remove protective foil before adhering.
-
If these adhesive strips are not available, it must be reapplied to the locations from which it was removed.
-
The locations at which the convertible top fabric was glued to the frame must be re-glued using D 001 200 adhesive.
-
Replacement fabric is delivered with all holes required for securing it to the convertible top frame.
-
Holes required after the fact for convertible top adjustment can be poked through the fabric using a hot soldering iron and pointed soldering iron
tip.
-
Place convertible top fabric on frame.
-
Engage convertible top fabric at front roof rail on left and right.
-
Secure convertible top fabric - 2 - at front roof rail - 1 - using Phillips-head screws (arrows, 11x).
-
Use a welding rod as an auxiliary pulling tool for the tensioning cable, bend a hook into one end.
-
Push welding rod - 1 - from front to back through canvas sleeve.
-
Hook tensioning cable - 2 - on end of welding rod - 1 -.