TT L4-1.8L Turbo (BEA) (2004)
-
Secure fabric in center as shown using two Phillips-head screws.
-
Glue front side tension straps onto front roof rail at left and right.
-
Coat adhesive surface - 1 - with D 001 200 and let it flash.
-
Press on forcefully after setting up.
-
Glue central side tension straps onto bow - 2 - at left and right.
-
Coat adhesive surface - 1 - with D 001 200 and let it flash.
-
Press on forcefully after setting up.
-
Using a hot soldering iron, poke holes through fabric for the tensioning strut striker.
-
Rivet striker using VAG 1753A pop-rivet pliers