TT L4-1.8L Turbo (BEA) (2004)
/Page-4541002.png)
-
Using pliers, pull securing pin completely out of retainer housing.
-
Place removed flap into new retainer housing.
-
Replace pin and secure flap in new retainer housing.
NOTE:
-
The new retainer housing is eroded in area of adapter piece - arrow -.
-
Clip retainer housing back into roof seam molding.
-
The textured (ridged) end - arrow - of flap - 1 - must point forward when installed.
-
Install roof seam molding.
