TT L4-1.8L Turbo (BEA) (2004)
Seat Heater: Service and Repair
Removing and Installing Seat Heating Element (Glued)
Removing And Installing Seat Heating Element (glued)
-
Remove seat.
-
Remove seat cover.
-
Cut electrical wire - 2 - off old heating element - 1 -.
-
Glue new heating element onto old heating element (avoid creases).
-
Insert heating element into fold at locations marked - 4 -.
-
Insert wire - 2 - into slot - 3 - provided.