TT L4-1.8L Turbo (BEA) (2004)
7
-
Locating pin
-
Ensures proper placement of spoiler on rear lid.
NOTE: For rear lids without locating pin holes, spoiler application requires use of special tool drill and assembly fixture, 66B2/ 00.
Fixture is available for loan through your special tool supplier.
-
Installation procedure for vehicles without pre-drilled locating pin holes for spoiler
Fig. 1 Application gun nozzle, cutting
-
Cut nozzle - a - of application gun - 1 - back to have diameter of 7 mm.
-
Application gun part number D 002 004.
-
Using cap screw - 2 -, screw application gun - 1 - into connecting rod.