TT L4-1.8L Turbo (BEA) (2004)
Brake Pedal Assy: Service and Repair
Brake Pedal, Assembly
Brake pedal
Exploded view
CAUTION: The brake pedal travel must not be restricted by additional floor coverings.
1. Mounting bracket
^
From approximately 06 99 with collapsing support -Item 2-.
^
When installing a new mounting bracket with collapsing support on a vehicle with year of make prior to approximately 06 99, the support must
be cut off at the point indicated with an -arrow- there is no means of attaching.
2. Collapsing support
3. Nut-28 Nm
^
Self-locking
^
Replace each time after removing
4. Brake light switch
5. Accelerator pedal
6. Bolt
7. Brake pedal
8. Pad
9. Nut-20 Nm
^
Self-locking
^
Replace each time after removing
10. Mounting bushing
^
Grease all bearings with polycarbamide grease, G 052 142 A2 before installing
11. Pivot pin
^
Grease all bearings with polycarbamide grease, G 052 142 A2, before installing