TT L4-1.8L Turbo (BEA) (2004)
Brake Pedal Assy: Service and Repair
Brake Pedal and Brake Servo, Separating
Separating brake pedal from brake booster
Special tools and equipment
^
T 10006 Release tool
Separating
^
Remove storage compartment on driver's side.
^
Remove brake light switch (square housing).
^
Remove brake light switch (round housing).
^
Unplug electrical connectors from clutch pedal switch and from interlock switch.
^
Remove connecting plate between clutch pedal and brake pedal -arrows- on vehicles with manual transmission.
^
Press brake pedal -1- in direction of brake booster and hold.
^
Insert release tool T 10006 as shown and pull toward driver's seat while providing support at brake pedal -1- (pedal must not be allowed to move
to rear at this point). This presses retainer tabs -3- off ball head.
^
Pull both release tool T 10006 and brake pedal toward driver's seat (this pulls brake pedal off push rod ball head.