TT L4-1.8L Turbo (BEA) (2004)
Brake Caliper: Service and Repair
Front Brake Caliper - 2FN, Servicing
Brake caliper 2FN, servicing
^
Install complete repair kit when performing service work.
^
New brake calipers are filled with brake fluid and pre-bled.
^
Apply thin coat of assembly paste G 052 150 A2 to brake cylinder, piston and seal.
1. Dust cap
^
Install on bleeder valve
2. Bleeder valve, 10 Nm
^
Grease lightly with assembly paste G 052 150 A2, before screwing in
3. Caps
^
Insert in mounting bushing
4. Guide pin, 25 Nm
5. Mounting bushing
^
Insert into brake caliper housing
6. Brake caliper housing
7. Brake carrier
^
Bolt onto brake caliper housing
8. Retaining spring
9. Seal
10. Piston
^
Apply thin coat of assembly paste G 052 150 A2 to piston before installing
11. Protective seal
^
Do not damage when inserting piston