audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Compression Check > < Not Available For Manufacturer's Scan Tool|Page 2882
Page 2
background image

-

Check wire between test box socket 115 + 2-pin connector terminal 2 for open circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohm

-

Also check wires for short circuit to B+ and Ground (GND).
Specified value: Infinite Ohm

-

Check wire between 2-pin connector terminal 1 and the Fuel Pump (FP) Relay -J17- for open circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohm

If resistances and wires are OK:

-

Replace Motronic Engine Control Module (ECM) -J220-.

Compression Check > < Not Available For Manufacturer's Scan Tool|Page 2882