TT L4-1.8L Turbo (BEA) (2004)
^
Pull off valve stem seals with extractor 3364.
Installing
^
To prevent damage to the new valve stem seals, place plastic sleeve - A - on valve stem.
^
Lightly oil sealing lip of valve stem seal.
^
Place valve stem seal - B - in the tool 3365 and push carefully onto the valve guide.
Notes: When replacing intake and exhaust valves, lightly oil valve stems before installing.
^
Install camshafts.
Notes:
^
After new lifters wait for approximately 30 minutes before starting engine. Hydraulic valve compensation elements have to settle (otherwise
valves will strike pistons).
^
After working on the valve gear, turn the engine carefully at least 2 rotations to ensure that none of the valves make contact when the starter is
operated.