TT L4-1.8L Turbo (BEA) (2004)
/Page-1319001.png)
Timing Cover: Specifications
Notes: Mark the direction of rotation before removing the toothed belt. If a used belt rotates in the wrong direction when reinstalled, this can result in
breakage.
1 - Engine support
2 - 45 Nm
3 - Toothed belt guard, top
4 - Toothed belt
5 - Idler roller
6 - 27 Nm
7 - 65 Nm
^
Use counter - hold 3036 to loosen and tighten
8 - Camshaft sprocket
9 - Tensioner
10 - Washer
11 - Tensioner for toothed belt
12 - O ring
13 - Coolant pump
14 - 15 Nm
15 - Crankshaft sprocket
16 - 90 Nm + 1/4 turn (90°) further
17 - 15 Nm
18 - 20 Nm
19 - Toothed belt guard, center
20 - Toothed belt guard, bottom
21 - 10 Nm
