TT L4-1.8L Turbo (BEA) (2004)
Evaporator Case: Locations
Heating and A/C Unit Mechanical Components, Overview
Heating And A/C Unit (With Heater Core And Evaporator) Mechanical Components, Overview
1
Heater core
2
Seal
-
Always replace
-
Seals heater core from engine compartment.
3
Mounting flange
4
Screw
5
Evaporator housing seal
-
Always replace
-
Seals refrigerant pipes from engine compartment.
-
Refer Fig. 3 given below
6
Defroster duct
7
Tensioning strap
-
Must be installed correctly, refer Fig. 1 given below
8
Climate control system wiring harness
-
When installing, ensure proper clearance to moving parts, refer Fig. 2 given below
9
Kick panel
-
Secured with tensioning strap and screw clips.
10
Screw clip
11
Footwell duct/vent
12
Heating and A/C unit
-
With electrical components
Fig. 1 Tensioning strap, installing