TT L4-1.8L Turbo (BEA) (2004)
Fuel Gauge Sender: Service and Repair
Fuel Pump and Sender For Fuel Gauge -G-, Component Overview
Fuel pump and Sender for fuel gauge -G-, component overview
1. Fuel pump
2. Seal
^
Always replace
^
To install, place into opening of fuel tank when dry.
3. Return line
^
Blue
^
From fuel rail
^
Attaches to connection with "R" marking at connector flange
^
To remove connector flange, press release button on connecting piece
4. Supply line
^
Black
^
To fuel filter
^
Attaches to connection with "V" marking at connector flange
^
To remove from connector flange or from filter, press release button on connecting piece.
5. 4-pin harness connector
^
For Fuel Pump (FP) and sender for fuel gauge -G
6. Union nut - 80 Nm
^
Use ring nut spanner 3217 to remove and install
7. Sender for fuel gauge -G