TT L4-1.8L Turbo (BEA) (2004)
/Page-4762003.png)
^
Remove mounts -1- and -2- for rear muffler.
^
Remove heat shield for rear muffler (arrows).
^
Remove right rear wheel housing liner.
^
Unscrew Ground (GND) wire -2- and screws -1- for fuel filler unit.
WARNING: Fuel supply lines are under pressure! Before removing from hose connection wrap a cloth around the connection. Then
release pressure by carefully pulling hose off connection.
^
Disconnect return line -1- (blue) supply line -2- (black) and vent line -3(white) front right at fuel tank (press release button).
Note: Electrical wire to Leak Detection Pump (LDP) -V144- will not be disconnected.
