TT L4-1.8L Turbo (BEA) (2004)
Fog/Driving Lamp Bulb: Service and Repair
Fog Light Bulb, Replacing
NOTE:
-
Left or right engine compartment trim must be removed prior to access to rear of headlight housing.
-
Removal and installation procedure is identical for normal (halogen) and High Intensity Gas Discharge (HID) lamps.
Removing
-
Remove cover -6- from headlight housing -1- (turn counter-clockwise on left headlight and clockwise on right headlight).
-
Disconnect electrical connection from fog light bulb -5-.
-
Disengage wire clip and take bulb out of housing.
Installing
CAUTION: Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
-
Install new bulb in housing.
-
Secure bulb with wire clip.
-
Connect electrical connection and install cover on headlight housing.