TT L4-1.8L Turbo (BEA) (2004)
/Page-4886002.png)
NOTE:
-
Left or right engine compartment trim must be removed prior to access to rear of headlight housing.
-
Removal and installation procedure is identical for normal (halogen) and High Intensity Gas Discharge (HID) lamps.
Removing
-
Remove cover -11 - from headlight housing -1 -.
-
Disengage wire clip on bulb holder -4- and take bulb holder out of housing.
-
Remove bulb -3- from bulb holder.
Installing
CAUTION: Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
-
Install new bulb in bulb holder.
-
Install bulb holder in headlight and secure with wire clip.
-
Install cover on housing and secure with wire retainer.
