TT L4-1.8L Turbo (BEA) (2004)
Brake Light Switch: Adjustments
ABS/ESP ITT Mark 20
Brake light switch, adjusting
Note:
Brake light switch must be removed for adjustment.
-
Disconnect connector from brake light switch.
-
Remove brake light switch by rotating to the left until it stops.
-
Completely remove plunger from brake light switch.
-
Press down brake pedal as far as possible by hand.
-
Guide brake light switch through assembly hole and re-install by rotating 90° toward left.
-
Release brake pedal
-
Connect connector for brake light switch.
-
Press brake pedal.
Brake lights light up.
-
Remove foot from brake pedal.
Brake lights must not light up.