TT L4-1.8L Turbo (BEA) (2004)
/Page-1098001.png)
Fluid - M/T: Testing and Inspection
5-SPD Manual 02J FWD
Transmission oil level, checking
-
Remove insulation tray (if fitted) below engine/transmission.
-
Remove plug (arrow) to check oil.
-
The oil level is correct if the transmission is full to the lower edge of the filler hole.
-
Fit plug (arrow).
-
When filling with new oil, note the following:
-
Remove plug (arrow).
-
Top up oil to lower edge of filler hole.
-
Fit plug (arrow).
-
Start engine, engage gear and allow transmission to turn for about 2 minutes.
-
Switch off engine and remove plug (arrow).
-
Top up oil to lower edge of filler hole again.
-
Fit plug (arrow).
