TT L4-1.8L Turbo (BEA) (2004)
/Page-1804001.png)
Clutch Switch: Testing and Inspection
With Manufacturer's Scan Tool
Clutch Vacuum Vent Valve Switch -F36-, Checking
Special tools and equipment
-
VAG1526A
-
VAG1527B
-
VAG1594A
-
VAG1598/31
-
VAS5051 with VAG5051/1
NOTE: This signal helps prevent excessive RPM oscillations and tip-in shocks when clutch is disengaged and is required for the cruise control system.
Test sequence
-
Connect VAS 5051 scan tool and select vehicle system "01 -Engine electronics" in selection. See: Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Scan Tool Connecting/With Manufacturer's Scan Tool/Connecting VAS 5051/VAG 1551 Scan Tool (ST)
When doing this the ignition must be switched on.
Display on VAS 5051 scan tool:
