TT L4-1.8L Turbo (BEA) (2004)
Electronic Throttle Control Module: Locations
Overview of EVAP canister system
Overview of EVAP canister system
1
Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
-
Component location: Front right in engine compartment
2
Air filter
-
for Leak detection pump (LDP) -V144-
3
Leak detection pump (LDP) -V144-
-
Component location: Under wheel housing liner in front right wheel housing
4
Test connection
5
Vent line
-
from gravity valve and pressure retention valve at fuel tank
6
EVAP canister
-
Component location: Bottom of spare tire well
7
Air filter
-
for Evaporative Emission (EVAP) Canister Purge Solenoid Valve -N115-
8
Evaporative Emission (EVAP) Canister Purge Solenoid Valve -N115-
9
Check-valve
-
Installation position (light/dark side): Arrow points in direction of aperture, as shown in figure.
10
Turbocharger
11
Throttle Valve Control Module -J338-
12
Check-valve
-
Installation position (light/dark side): Arrow points in direction of aperture, as shown in figure.
13
Check-valve
-
inserted in vacuum reservoir
14
Vacuum reservoir
-
for Leak detection pump (LDP) -V144-