TT L4-1.8L Turbo (BEA) (2004)
/Page-2209001.png)
Accelerator Pedal: Service and Repair
Removing and Installing Accelerator Pedal Module With Throttle
Removing and installing accelerator pedal module with Throttle Position (TP)
^
sensor -G79- and Sender -2- for accelerator pedal position -G185-
^
Remove driver-side storage compartment.
^
Disconnect 6-pin harness connector -2-.
^
Remove nuts -1- and -3-.
^
Remove accelerator pedal module.
Installation is the reverse of removal.
Tightening torque
