TT L4-1.8L Turbo (BEA) (2004)
Fuel Gauge Sender: Locations
All Wheel Drive (AWD) Vehicles
All Wheel Drive (AWD) vehicles
1
Sender for fuel gauge -G-
2
Fuel pump
-
Check fuel pump
3
Seal
-
replace
-
to install, place into opening of fuel tank when dry
4
Fuel return line
-
blue
-
from fuel rail
-
connects to connection with "R" marking at connector flange
-
to remove from connector flange, press release button on connecting piece
5
Fuel supply line
-
Black
-
To fuel filter
-
connects to connection with "V" marking at connector flange
-
to remove from connector flange or from filter, press release button on connecting piece
6
Electrical 4-pin harness connector
-
for Fuel Pump (FP) and Sender for fuel gauge -G- and Fuel Level Sensor 2 -G169-
7
Union nut -80 Nm
-
Use ring nut spanner 3217 to remove and install
8
Electrical 2-pin harness connector
-
For Fuel Level Sensor 2 -G169-
9
Union nut -80 Nm
-
Use ring nut spanner 3217 to remove and install
10
Seal
-
replace