TT L4-1.8L Turbo (BEA) (2004)
Throttle Position Sensor: Testing and Inspection
With Manufacturer's Scan Tool
Throttle Position (TP) Sensor And Sender -2- For Accelerator Pedal Position, Checking
Special Tools and equipment
-
VAG1526A
-
VAG1594A
-
VAG1598/31
-
VAS5051 with VAG5051/1
Both Throttle Position (TP) sensor -G79- and Sender -2- for accelerator pedal position -G185- are located at the accelerator pedal and communicate the
driver's intentions to the ECM completely independently of each other. Both sensors are stored in one housing.
Test sequence
-
Connect vehicle diagnostic, testing and information system VAS 5051 and select vehicle system "01 -Engine electronics" in selection. Ignition
must be switched on. See: Computers and Control Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Scan Tool
Connecting/With Manufacturer's Scan Tool/Connecting VAS 5051/VAG 1551 Scan Tool (ST)
Display on VAS 5051: