TT L4-1.8L Turbo (BEA) (2004)
-
An insufficient ATF filling as well as filling to excess affects the function of the transmission.
-
Using V.A.G 1924 fill with ATF until at between 35°C and 45 5C ATF emerges via overflow pipe
(arrow -2-) from inspection aperture.
-
Tighten ATF inspection plug (arrow -1-) with new seal to 27 Nm. ATF check is now complete.
Note:
-
The inspection plug must at the latest be resealed on reaching a temperature of 45°C (50°C for tropical countries). If
necessary, allow transmission to cool down and repeat the test.
-
Tighten filler plug (arrow) with new seal to 39.5 Nm.
-
Exit function "08 - Read measured value block" by pressing ? key.
-
Press "06 - End output".