TT L4-1.8L Turbo (BEA) (2004)
Constant Velocity Joint: Service and Repair
Triple roller inner joint, disassembling and assembling
Disassembling
-
Bend open tabs slightly and pry off cover.
-
Mark installation position of parts 1-3.
-
If the parts are not marked so they can be installed in their original positions when assembling, is possible that the joint will be noisy when driving.
-
A waterproof felt tipped pen is suitable for marking.
-
Take rubber ring (arrow) out of groove.
1 - Joint
2 - Triple roller star
3 - Drive axle
Notes: The rollers on the triple roller star must not be pressed off.