TT L4-1.8L Turbo (BEA) (2004)
Flywheel: Service and Repair
Dual mass flywheel, removing and installing
Removing
^
Mark installing position of dual mass flywheel on crankshaft with a permanent felt - marker.
^
Insert counter - hold tool 3067 in drilling in cylinder block, and engage on flywheel.
^
Insertion position for counter - hold tool:
-
A: to tighten
-
B: to loosen
^
Loosen flywheel bolts.
Installing
^
Fit dual mass flywheel to crankshaft in the position marked when removing it.
^
Fit new bolts and tighten.
Tightening torque
^
Flywheel to crankshaft: 60 Nm + additional 90°
Notes: 90° = 1/4 turn additional