TT L4-1.8L Turbo (BEA) (2004)
Shift Cable: Service and Repair
5/6 SPD Manual 02M AWD
Selector cables, removing, installing and assembly overview
Notes: Lubricate all bearings and moving surfaces with Polyurea grease Part No. G 052 142 A2.
1. Selector Bowden control
^
On gate selector bracket
2. Shift Bowden control
3. Circlip
4. Gear shift housing
5. Circlip
^
Do not damage cable when removing
6. Support bracket
7. Bushing
^
Support bracket mounting to transmission
8. Distance piece
9. Hexagon bolt, 25 Nm
^
For support bracket
10. Cable locking mechanism
11. Relay lever
^
Installation position, Refer to Fig. 1
12. Bushing
13. Retaining washer
14. Shoe
15. Transmission selector lever
16. Hexagon nut, 25 Nm
17. Cable locking mechanism
^
For selector bowden cable to shift lever
^
Replace item 15 after prying off from transmission shift lever.
^
Unlatch for adjusting shift control mechanism