TT L4-1.8L Turbo (BEA) (2004)
-
Secure rear final drive to mounting block.
-
Place drip tray under final drive.
-
Remove driveshaft flange hexagon nut.
A- Hexagon bolts M 8 x 20
Notes: When loosening driveshaft flange hexagon nut counter - hold using pipe - C - with special tool 2004 (2nd technician).
-
Pull off driveshaft flange. If the flange does not come off easily, use three - arm puller, e.g. Kukko 12 -1.
-
Pull seal out with removal tool VW 681.
Installing