TT L4-1.8L Turbo (BEA) (2004)
-
Cut out first part of window glass.
-
Move winding device to next position as shown and attach relay pulley in lower corner of window.
-
Route cutting wire as shown.
-
Cut out window glass up to the point where thread no longer runs in relay pulley.
-
Remove relay pulley and continue to cut out window glass.
-
Move winding device to next position as shown and attach relay pulley in upper corner of window.
-
Route cutting wire as shown.
-
Cut out window glass up to the point where thread no longer runs in relay pulley.