TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-1925005.png)
-
Select forward arrow > on navigation bar.
-
Read Online-connection set-up screen.
-
Press "Done" button -arrow- to proceed with set-up.
-
Enter GeKo User ID and password.
-
Press OK button.
^
The Online connection is now established, and all input data transmitted.
^
During this time, the tester screen displays various confirmation messages.
^
If any input data is incorrect, the tester will prompt the operator accordingly.
^
If all input data is recognized and accepted, a final message screen displays the 4-digit radio code.
-
Record code.
-
Refer to "Radio Code entry procedure" in appropriate Repair Manual, Communication, Repair Group 91.
Technical Support
Note:
The technical support contacts are for Audi dealership personnel only.
