audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Trunk / Liftgate Switch > < Removing and Installing Seat Heating Element (Glued)|Page 6845
Page 1
background image

Power Mirror Switch: Service and Repair

CAUTION:
Before beginning repairs on the electrical system:

-

Obtain the anti-theft radio security code.

-

Switch the ignition off.

-

Disconnect the battery Ground (GND) strap.

-

After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according
to Owners's Manual

Mirror Adjuster Switch, Removing

-

Remove door trim.

-

Remove insulation.

-

Remove handle and switch trim.

-

Disconnect harness connector-1-by pressing on retainer hook-2-.

-

Remove window adjuster switch with trim plate by pressing on both springs -arrows-.

-

Using screwdriver at position -3- (2x), detach mirror adjuster switch -1- from trim plate -2-.

Trunk / Liftgate Switch > < Removing and Installing Seat Heating Element (Glued)|Page 6845