TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-2105002.png)
-
Wedge plastic spacer - 2 - under spoiler at angle.
-
Place cutting wire - 3 - under spoiler - 1 - in area past first stud (outer marking) and cut through adhesive to next stud.
-
Pull cutting wire in direction of arrows to middle stud.
-
Repeat cutting action from other side starting at outside edge and working to center as before to fully cut spoiler - 1 - free.
-
Slowly remove spoiler from lid.
