TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-1308001.png)
Brake Pedal Assy: Service and Repair
Brake Pedal, Assembly
WARNING: Brake pedal travel must not be restricted by additional floor coverings.
Notes: Grease all mountings before installation with grease Part No. G 000 602.
1. Mounting bracket
2. Self locking hexagon nut, Tighten to 30 Nm
3. Brake light switch
^
Before installing, connect brake pedal to brake servo
^
Before installing pull plunger out completely
^
Push brake pedal down as far as possible by hand
^
Guide through mounting hole (only fits in one position) and secure by turning 90° clockwise
^
Release brake pedal
^
Connect brake pedal connector
^
Check function of brake lights
4. Accelerator pedal
5. Hexagon bolt
6. Brake pedal
7. Pad
8. Self - locking hexagon nut, Tighten to 20 Nm
9. Mounting bush
10. Pivot pin
