TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-1310002.png)
allowed to move backwards) so that the mounting retaining lugs - 3 - will be pressed off the ball head of the push rod - 2 - .
Notes: For ease of illustration, the separation of the brake pedal from the brake servo is shown with the pedal cluster removed.
^
Pull special tool T 10006 and brake pedal together towards the driver's seat (the brake pedal will be pulled off the ball head of the push rod).
Joining
^
Hold push rod ball head in front of mounting and push brake pedal in direction of brake servo, so that the ball head audibly locates.
Further installation is performed in reverse order.
^
Install brake light switch by inserting in opening and turning 90°
^
Adjust brake light switch.
Refer to Lighting and Horns.
^
Check function of brake light switch.
