TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-1340001.png)
Hydraulic Control Assembly - Antilock Brakes: Locations
ABS/ESP ITT Mark 60
ABS/ESP ITT Mark GO, module and hydraulic unit
Exploded view
CAUTION: Interchanging brake line connections will result in ESP system malfunction.
^
After connecting brake lines to hydraulic unit, perform final control diagnosis.
Note: Final control diagnosis can be performed to establish whether line connections have been interchanged.
1. Cap nut - 20 Nm
2. Torx socket head bolt - 4 Nm
3. Brake line
^
Hydraulic unit to left rear brake caliper
4. Torx socket head bolt - 4 Nm
5. Brake line
^
Hydraulic unit to right rear brake caliper
6. ABS hydraulic unit -N55-
^
Installation location: in engine compartment, left side
7. Brake line
^
Brake master cylinder/primary piston circuit to hydraulic unit
8. Brake line
^
Hydraulic unit to left front brake caliper
9. Brake line
^
Hydraulic unit to right front brake caliper
10. Brake line
^
Brake master cylinder/secondary piston circuit to hydraulic unit
11. ABS Control Module (w/EDL) -J104-
