TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-600003.png)
-
Set crankshaft to markings for TDC of No. 1 cylinder -arrows- by turning central bolt on crankshaft sprocket in direction of rotation.
-
Remove vibration damper, making sure not to change the TDC position.
-
Remove center and bottom sections of toothed belt guard.
-
Unbolt engine support from engine console and engine console from body -arrows-
-
Unbolt connecting piece between engine console and body. - Take out engine console.
-
Remove bolts for engine support -arrows- , but do not take out the engine support.
Notes: To remove the bolts for the engine support, raise or lower the engine slightly as necessary via the spindles on engine support bracket 10 -
222A.
-
Mark direction of rotation of toothed belt with chalk or felt pen.
