TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-1701001.png)
Air Door Actuator / Motor: Service and Repair
Central Air Flap Motor -V70-, Removing and Installing
Central Air Flap Motor -V70-, Removing And Installing
-
Remove footwell vent.
-
Disconnect electrical connection -A-.
-
Remove screws -B- (3x).
-
Disengage actuating arm -C- and remove motor.
NOTE:
-
After installing, always carry out On Board Diagnostic (OBD) on Climate control.
-
When installing motor, make sure actuating arm -C- is properly aligned and installed.
-
Route electrical wiring harness so that it cannot come into contact with any moving parts like the actuating arm on the motor or other.
