audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Air Flow Flap Motor -V71-, Removing and Installing|Page 5704 > < Air Flow Flap Motor -V71-, Removing and Installing|Page 5702
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Footwell/Defroster Flap Motor -V85-, Removing and Installing

Footwell/Defroster Flap Motor -V85-, Removing And Installing

-

Remove driver's storage compartment.

-

Disconnect electrical connection -A-. 

-

Remove screws -B- (3x). 

-

Disengage actuating arm -C- and remove motor.

NOTE: 

-

After installing, always carry out On Board Diagnostic (OBD) on Climate control.

-

When installing motor, make sure actuating arm -C- is properly aligned and installed. 

-

Route electrical wiring harness so that it cannot come into contact with any moving parts like the actuating arm on the motor or other.

Air Flow Flap Motor -V71-, Removing and Installing|Page 5704 > < Air Flow Flap Motor -V71-, Removing and Installing|Page 5702