TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-1767004.png)
-
Replace gasket and ensure it is properly seated on the evaporator connecting flange.
After installing the heating and A/C unit, proceed as follows:
-
Bend section -A- of the instrument panel support back into position.
-
Bolt section -B- (which is welded to section -A-) to section -C- of the support with two bolts -D- (for example, M6 x 10 bolts) and two combi nuts
-E-.
NOTE: When inserting bolts -D-, make sure they do not contact the bracket for the airbag unit.
