TT Coupe L4-1.8L Turbo (ATC) (2001)
Hose/Line HVAC: Service and Repair
Refrigerant Pipes on Compressor, Removing and Installing
Refrigerant Pipes On Compressor, Removing And Installing
-
Discharge refrigerant circuit.
-
Remove screws -A-, tightening torque 20 Nm (15 ft lb).
-
Renew O-rings -B- (10.8 mm; 1.8 mm) and -D- (14.3mm; 2.4mm).
NOTE:
-
Refrigerant pipe -C- goes to the condenser.
-
Refrigerant pipe -E- comes from the expansion valve.
-
When installing the refrigerant pipe, make sure that spring pins -F- are properly positioned.
-
Seal off all open refrigerant pipes and connections on compressor.