TT Coupe L4-1.8L Turbo (ATC) (2001)
6
-
Reference of wire continuation (current track number)
Number in frame indicates current track where wire is continued.
7
-
Wire connection designation in wiring harness
Location of wire connections are indicated in the corresponding wiring diagram index.
8
-
Terminal designation
Designation which appears on actual component and/or terminal number of a multi-point connector
9
-
Ground connection designation in wire harness
Locations of ground connections are indicated in corresponding wiring diagram index.
10
-
Component designation
Use legend in the corresponding wiring diagram index to identify the component code.
11
-
Component symbols See: Diagrams/Diagram Information and Instructions/Symbols Used In Wiring Diagrams
12
-
Wire cross-section size (in mm2) and wire colours
Abbreviations are explained in "Wire Color Code Identification". See: Diagrams/Diagram Information and Instructions/Wire Color Code
Identification
13
-
Component symbol with open drawing side
Indicated component is continued on another wiring diagram. The number of corresponding wiring diagram can taken from list of contents.
14
-
Internal connections (thin lines)
These connections are NOT wires. Internal connections are current carrying and are listed to allow tracing of current flow inside
components and wiring harness.
15
-
Reference of continuation of wire to component
For example: Control module for anti-theft immobilizer J362 on 6-Pin Connector, terminal 2
16
-
Relay panel connectors
Shows wiring of multi-point or single connectors on relay panel. For example: S3/3 - Multi-point connector S3, terminal 3
17
-
Reference of internal connection continuation
Letters indicate where connection continues on the previous and/or next page (image).