TT Coupe L4-1.8L Turbo (ATC) (2001)
Accelerator Pedal Position Sensor: Service and Repair
1
-
Rubber pedal cover
2
-
10 Nm
3
-
6-pin harness connector
4
-
Accelerator pedal module
-
With Throttle Position (TP) sensor -G79- and sender -2- for accelerator pedal position -G185-
-
Removing and installing.
Removing and installing accelerator pedal module with Throttle Position (TP) sensor -G79- and sender -2- for accelerator pedal position
-G185-
-
Remove driver - side storage compartment.
-
Disconnect 6-pin harness connector -2-.
-
Remove nuts -1- and -3-.