TT Coupe L4-1.8L Turbo (ATC) (2001)
/Page-1002.png)
When procedure applies to vehicles within the New Vehicle Limited Warranty, use the table shown.
To Check For DTC's
-
Connect VAS 5051 Diagnostic tool.
-
Switch ignition ON.
-
From VAS 5051 Start-up screen, select "Vehicle self-diagnosis".
-
Select vehicle system "37-Navigation" (use scroll bar at right if necessary).
-
Select diagnosis function "02-Interrogate fault memory".
-
Correct any stored DTC according to Navigation System DTC table in Electrical Equipment section of the respective Repair Manual.
Note:
For any DTC's found, select "Print" and "Save Result". Do not print screens! (Select "Yes" at prompt "Erase old log?"; if applicable). Select "Print",
then "Self-diagnosis log" when all DTC's are identified.
To code navigation control module:
