TT Coupe L4-1.8L Turbo (ATC) (2001)
-
Remove upper nut on ball joint.
-
Apply ball joint puller as shown in illustration and press out ball joint.
Notes: To protect ball joint threads, leave nut on a few turns.
-
Remove bolts - 1 - for steering box and bolts - 2 - for pendulum support.
-
Vehicles with 165 kW engine (engine code APX): detach rubber mounting on front exhaust pipe.
-
Place transmission jack VAG1383 A with universal support 1359/2 under subframe.
-
Remove bolts - 3 - and - 4 - for subframe.
-
Lower subframe carefully.
When installing, note the following points in particular:
Before inserting bolts for subframe, position steering box on sub - frame and insert bolts.
The threaded sleeve - 1 - must seat in subframe hole.
Notes: Normal, commercially available tools (18 mm ring socket attachment) can also be used instead of VAG 1332/10.