TT Coupe L4-1.8L Turbo (AWP) (2005)
/Page-1579001.png)
Brake Caliper: Description and Operation
Rear
Rear Brake Caliper, Assembly Overview
1 - Bolt - 35 Nm
^
Self-locking
^
Replace each time after removing
^
When loosening and tightening counter-hold on guide pin
2 - Bleeder screw - 10 Nm
^
Apply thin coat of assembly paste G 052 150 A2 to threads before screwing in
3 - Protective seal
4 - Guide pins
^
Grease before pulling on protective cap
5 - Protective cap
^
Pull onto brake carrier and guide pin
6 - Brake carrier with guide pin and protective cap
^
Supplied as replacement part, assembled with sufficient grease on guide pins
^
If protective caps or guide pins are damaged, install repair kit. Use grease packet supplied to lubricate the guide pins.
