TT Coupe L4-1.8L Turbo (AWP) (2005)
/Page-1592003.png)
-
Insert brake pads and brake pad retaining springs - arrows - into brake carrier.
-
Pull protective foil off outer brake pad back plate.
-
Secure brake caliper housing with new self-locking bolts.
Note:
^
The repair kit contains four self-locking hex bolts, which must always be installed.
-
Press brake lever -2- in direction of arrow and attach parking brake cable.
-
Open clip -1- securing parking brake cable.
CAUTION
After installing brake pads, press brake pedal firmly several times with vehicle stationary to ensure that brake pads become properly seated.
-
Check brake fluid level and top off, if necessary.
Tightening Specification
