TT Coupe L4-1.8L Turbo (AWP) (2005)
Vacuum Pump: Removal and Replacement
Brake System Vacuum Pump, Removing and Installing
There is no provision for repairing the brake system vacuum pump V192. The pump must be replaced if defective.
Removing
-
Unscrew hex bolt securing guard plate.
-
Unscrew bolts -1- on bracket for vacuum pump on left side of subframe.
-
Disconnect vacuum hose - arrow - from vacuum pump.
-
Unplug electrical connector.
-
Take out brake system vacuum pump V192.
-
To remove bracket - arrow -, unscrew nut -2- from bolt -1-.
-
Remove bolt -4- and detach bracket.
-
To disassemble bracket further, remove bolts -3-.
Installing
Installation is performed in reverse sequence.
Tightening Specifications