TT Coupe L4-1.8L Turbo (AWP) (2005)
Wheel Speed Sensor: Removal and Replacement
Rear Axle Components
ABS Wheel Speed Sensor Wire, Replacing
Note:
^
Always use Wiring Harness Repair Kit VAS 1978 for repairs on wiring harnesses and connectors.
Special tools, testers and auxiliary items required
^
Wiring harness repair kit VAS 1978
Removing
-
Remove wheel housing liner.
-
Release connector on wheel speed sensor and disconnect wiring.
-
Remove interior side panel trim.
-
Pull insulating grommet (arrow) off wiring connection.
-
Cut speed sensor wiring with Wire Strippers VAS1978/3 and remove defective wiring.
Installing
Install in reverse sequence; note the following points: