TT Coupe L4-1.8L Turbo (AWP) (2005)
Note:
The sealing flange must be installed within 5 minutes after applying silicone sealant.
-
Cut off nozzle of tube at front marking (nozzle diameter approx. 3 mm).
Sealant should applied in a bead 2 - 3 mm wide (arrows).
Note:
The bead of sealant must not be thicker than 3 mm, otherwise excess sealant can enter the oil pan and obstruct the filter screen in the oil intake
line.
-
Apply bead of silicone sealant onto clean sealing surfaces of sealing flange, as illustrated.
-
Install sealing flange immediately, and tighten all bolts lightly.
Note:
To install sealing flange with the oil seal already installed, use guide sleeve from 2080A.
-
Tighten bolts on sealing flange in diagonal sequence.
-
Install oil sump.
Note:
After installing, the sealant must be allowed to dry for about 30 minutes before filling with engine oil.
-
Install crankshaft sprocket.