TT Coupe L4-1.8L Turbo (AWP) (2005)
Drive Belt: Service and Repair
Ribbed belt, removing and installing
Note:
^
The following illustration shows the belt drive on vehicles without air conditioning.
^
Before removing the ribbed belt, mark the direction of rotation using chalk or a felt marker pen. If the belt rotates in the wrong direction when
it is reinstalled, this can cause breakage. Ensure that the belt is properly seated in the pulleys when installing.
^
Install air conditioning compressor Fig. 3.
1 - 25 Nm
2 - Tensioning element for ribbed belt
^
Turn with open-end wrench to loosen ribbed belt.
3 - Vibration damper
^
With pulley for ribbed belt
^
Can only be installed in one position
4 - 25 Nm
5 - Generator
^
To facilitate positioning of Generator on bracket, knock back threaded bushings for retaining bolts slightly.
6 - 25 Nm
7 - Bracket